How big is the Tiffany floor lamp 7259?
The lamp is 165 cm highand the shade has a diameter of 40 cm. The total weight is 9 kg. This makes it a large floor lamp. Measure the height and width of your chosen spot, for example next to the sofa or armchair, before ordering.

How many pieces of glass is the shade made of?
The shade consists of approximately 490 pieces of genuine stained glass. The pieces vary in shape and color. They are joined by hand using the Tiffany technique to form a single shade. The dark solder lines connect the glass and are part of the pattern.

Is the motif actually a dragonfly?
The insect figures have long bodies and spread wings that are reminiscent of dragonflies. That is why we call it a dragonfly-like motif. This description refers to the visible form of the pattern; it is not a separately stated technical product specification.

What colors do you see when the lamp is lit?
You primarily see yellow, light yellow, amber-like yellow, and cream. In between, smaller details in red, green, blue, purple, and orange remain visible. The dark lines outline the pieces of glass and keep the insect figures recognizable within the color palette.

Which parts of the shade light up the most?
Especially the large yellow and amber-colored parts light up clearly. The cream to white-yellow glass pieces along the bottom also become clearly visible. The surfaces do not all appear equally bright: some remain deeper in color, which creates variations across the shade.

Does this floor lamp provide enough light for reading?
No fixed lumen value is specified. Therefore, we cannot guarantee that this lamp alone provides sufficient focused reading light. The light output also depends on the chosen bulbs and their placement. You can use it next to a reading chair as decorative lighting and supplement it with a targeted reading lamp if necessary.

Which light sources do I need?
You need two E27-fitting light sources. They are not included. RORUVERA recommends LED of approximately 5 watts per fitting. The maximum permitted wattage is 40 watts per fitting. The lamp is suitable for LED and incandescent bulbs.

Which color temperature is recommended?
For a warm color impression, we recommend approximately 2700 K. That is the color temperature of the light source you choose. It is not a fixed technical characteristic of the floor lamp. The yellow, amber, and cream-colored glass also influence the color you see.

Can the two light points be operated separately?
Yes. Each E27 fitting has its own pull cord. This allows you to turn on one or both light points. In addition, there is a general on/off switch in the cord. That operates the lamp as a whole.

Does the lamp have a dimmer?
No, there is no built-in dimmer. You can choose whether one or both light points are on, thanks to the separate pull cords. That choice does not provide gradual brightness control like dimming does.

How long is the cord and what plug does the lamp have?
The cord is 220 cm longand has a type C European 2-pin plug. The general on/off switch is located in the cord. Check in advance whether the power outlet is reachable from your chosen spot without the cord being pulled tight.

Do I have to assemble the floor lamp myself?
Yes, minor assemblyis required. This usually takes a few minutes and you do not need any tools for it. You assemble the parts and place the two E27 light sources before plugging in the lamp.

How do I assemble the floor lamp?
Screw the screwable rod segments together and screw the fitting into place. Place the small pipe and the shade, and then tighten the decorative cap. Next, install the two E27 light sources. Check that all parts are straight and firmly attached before plugging it into the wall outlet.

What is the base made of?
The base is specified as high-quality composite and a zinc-aluminum metal alloy. The wide round base has visible relief. The material of the long stand is not separately specified; the material designation of the base therefore does not automatically apply to all parts.

Is every floor lamp exactly the same?
The design is the same, but small details may differ. The shade is made by hand using the Tiffany technique. Variations in glass and soldering are part of this, meaning that no two pieces are exactly the same in every detail.

In which rooms can I use this lamp?
You can consider a living room, bedroom, hallway, library, home office, or reading corner. A conservatory can also be suitable if it is dry and part of the interior space. With IP20, the lamp is intended for dry indoor areas. It is not suitable for damp rooms or outdoor use.

How much clearance should I keep around the shade?
The shade is 40 cm in diameter. Leave enough space so that it does not bump into anything and the pattern remains visible. No separate distance in centimeters is specified. Also check the total height of 165 cm and ensure you can walk past the lamp comfortably.

What should I pay attention to before ordering this floor lamp?
Measure whether the height of 165 cm and shade diameter of 40 cm fit. Keep furniture and walking space around the lamp clear and check whether the power outlet is within reach of the 220 cm cord. You need two separate E27 light sources. Also, take the minor assembly and operation without a built-in dimmer into account in your choice.

Is this Tiffany floor lamp suitable as a gift?
The model may suit someone who loves Tiffany lamps, genuine stained glass, and nature motifs. Due to the height of 165 cm, the wide shade, and the weight of 9 kg, it is wise to check in advance where the recipient can place it. It is a gift for which both available space and personal taste are factors.